Other Sauna
Maxxus Saunas Seattle Elite 2-Person PureTech™ Near Zero EMF (Under 2 MG) FAR Infrared Sauna, Curb Side Delivery
Key Features & Highlights
Delivery: Curbside or End of Driveway
Wood: Natural reforested Canadian Hemlock wood construction
Capacity: 2 person - Overall Dimensions: (WDH): 48″ x 42″ x 75″
Temperature: operates up to 140F (Ideal between 118 to 135F)
6 PureTech Near Zero EMF (EMF Under 2MG when sitting 2 to 3 inches from the heating panels) FAR Infrared Carbon heating panels
Complete Product Specifications
Operating Cost Calculator
Estimate how much electricity this sauna will consume based on your local rates and usage patterns.
US Average electricity rate is ~$0.16/kWh
Estimated Costs
Operating this 0.0 kW sauna 3 times a week for 60 mins (including warm-up) uses roughly 0 kWh of electricity per month.
Site Preparation Checklist
Prepare your home or backyard before your sauna kit arrives. Check off each step to track your readiness.
Project Specifications & Guidance
Level Support
The sauna weighs approx. 275 pounds empty. Needs a flat, level surface. For indoor use, tile, concrete, or vinyl flooring is fine. For outdoor cabin saunas, build a concrete or gravel pad.
Null Dedicated
Runs on a standard 110V-120V dedicated 15-20 Amp household circuit. Plug-and-play, but ensure no other high-draw appliances share the circuit.
Clearances
Sauna dimensions are 48 x 42 x 75 inches. Allow at least 2 feet of clearance around all sides for barrel bands adjustment and airflow. Make sure there are no low-hanging trees above.
Sealing & Care
Apply a high-quality UV-inhibiting, water-repellent sealant to the outer wood surfaces immediately after assembly. Never apply stain or sealer to the inside walls or benches.
Action Checklist0 / 5 Done
Zoning Note: Most cities allow saunas under 120 sq ft without a building permit, but setbacks from property fences (usually 3-5 ft) are still enforced.
Other Recommended Barrel Saunas
