SaunaGrade Sauna Buying Guide
Maxxus Saunas Seattle Elite 2-Person Infrared Sauna Infrared Sauna
SaunaGrade 7.8 / 10 • Good Value

Maxxus Saunas Seattle Elite 2-Person Infrared Sauna

Electrical
120V Plug & Play Standard outlet
Kit Inclusions
Complete Kit Heaters pre-installed
Timber / Build
Canadian Hemlock Solid timber
Running Cost
~$0.23 per 45-min session
Retail Price Estimate Check Current Price
Check Current Price on Amazon
Verdict The Bottom Line

This 2-person far-infrared sauna is a solid choice for couples or solo users wanting a low-EMF indoor setup. It heats up quickly to comfortable sweating temperatures without requiring heavy-duty electrical wiring. Just keep in mind that the compact 48-by-42-inch footprint is snug, so it fits two people comfortably sitting up, but nobody is lying down.

SaunaGrade Evaluation

Evaluation Breakdown

Overall Rating Good Value
7.8 / 10
1 Heat & Performance 8.3 / 10

Full-spectrum wavelength calibration and 360° surround body coverage

Rating Great
2 Build & Durability 7.3 / 10

Hypoallergenic wood stability, double-wall insulation, and glass seals

Rating Good
3 Health & Safety 7.7 / 10

Magnetic EMF radiation shielding (<2.0mG) and certified zero-VOC glues

Rating Good
4 Design & Usability 7.8 / 10

Digital controls, chromotherapy lighting, and 120V plug-and-play setup

Rating Good

Engineering Strengths

  • • Full-spectrum hybrid infrared array (Near, Mid, and Far therapeutic wavelengths)
  • • Ultra-low EMF & ELF shielded backplanes meeting Swedish MPR II standards
  • • Non-allergenic, clean Canadian Hemlock construction
  • • 360° targeted surround carbon panel heat distribution
Evaluated under Finnish Sauna Standards & thermodynamic heat-transfer physics. View Scoring Methodology ➔

SaunaGrade Buyer's Analysis

The Maxxus Seattle Elite uses natural reforested Canadian Hemlock wood, which gives the cabin a sturdy feel and helps hold heat efficiently indoors. It features six PureTech near-zero EMF carbon heating panels that keep electromagnetic fields below 2 milligauss when sitting a few inches away. This unit operates up to 140 degrees Fahrenheit, which is standard for carbon-panel infrared saunas and ideal for longer, relaxing sessions.

Assembly relies on a buckle-together construction method that makes putting the panels together relatively straightforward for two people. Because it is designed for indoor use, you will want to place it in a climate-controlled or protected space like a basement, master bath, or spare bedroom. It plugs into a standard household setup, meaning you avoid the hassle of hiring an electrician to run a dedicated 240V line.

Real-world comfort is good for a two-person model, though taller users may find the 75-inch height a bit cozy. The bench provides adequate seating for two adults side-by-side, but it lacks the legroom to stretch out completely. If you want a straightforward, low-EMF indoor sweat session without complicated installation, this model hits the right notes.

Key Features & Highlights

✓

Constructed from natural reforested Canadian Hemlock wood

✓

Equipped with 6 PureTech near-zero EMF carbon heating panels

✓

Operates up to 140 degrees Fahrenheit with ideal range between 118 and 135 degrees

✓

Compact exterior dimensions of 48 inches wide by 42 inches deep by 75 inches high

✓

Standard plug-in setup designed for convenient indoor placement

+ Pros

  • • Low EMF heating panels keep electromagnetic fields under 2 MG
  • • Plugs into standard household electrical outlets without specialized wiring
  • • Buckle-together assembly makes setup manageable for DIYers

− Cons

  • • Compact 2-person footprint is too tight for lying down
  • • Maximum temperature of 140F is lower than traditional hot-rock saunas

Complete Technical Specifications

Model / SKU B0BL8L9FX7
Manufacturer Maxxus Saunas
Sauna Type Infrared
Seating Capacity 2 Person
Wood Material Canadian Hemlock
Heater Power 0.00 kW
Voltage 110V
Power Source Far-Infrared
Dimensions 48 x 42 x 75 inches
Weight 275 pounds
Heater Included Yes
Front Porch No
Panoramic Window No
Roof Cover Included No
Sauna Stones Included No
LED Lighting Unknown

Operating Cost Calculator

Estimate electricity consumption and operating costs based on your local utility rates and usage habits.

1.8 kW
$0.16 / kWh

US national average is ~$0.16/kWh

Estimated Electricity Cost

Per Session (with Preheat) $0.00
Monthly Estimate $0.00
Annual Operating Total $0.00

Running this sauna 3×/week consumes ~0 kWh per month.

Similar Recommended Infrared Saunas