Other Sauna
Maxxus Saunas Seattle 2-Person Low EMF (Under 8 MG) FAR Infrared Sauna, Curb Side Delivery 2024 Model MX-J206-01
Key Features & Highlights
Capacity: 2 person - Overall Dimensions: (WDH): 48″ x 42″ x 75″
Wood: Natural reforested Canadian Hemlock wood construction
Low EMF (EMF Under 8MG when sitting 6 to 8 inches from the heating panels) FAR Infrared Carbon heating panels
Temperature: operates up to 140F (Ideal between 118 to 135F)
Electrical service: 110V/15amp plug & play
Complete Product Specifications
Operating Cost Calculator
Estimate how much electricity this sauna will consume based on your local rates and usage patterns.
US Average electricity rate is ~$0.16/kWh
Estimated Costs
Operating this 0.0 kW sauna 3 times a week for 60 mins (including warm-up) uses roughly 0 kWh of electricity per month.
Site Preparation Checklist
Prepare your home or backyard before your sauna kit arrives. Check off each step to track your readiness.
Project Specifications & Guidance
Level Support
The sauna weighs approx. 275 pounds empty. Needs a flat, level surface. For indoor use, tile, concrete, or vinyl flooring is fine. For outdoor cabin saunas, build a concrete or gravel pad.
110V Dedicated
Runs on a standard 110V-120V dedicated 15-20 Amp household circuit. Plug-and-play, but ensure no other high-draw appliances share the circuit.
Clearances
Sauna dimensions are 48 x 42 x 75 inches. Allow at least 2 feet of clearance around all sides for barrel bands adjustment and airflow. Make sure there are no low-hanging trees above.
Sealing & Care
Apply a high-quality UV-inhibiting, water-repellent sealant to the outer wood surfaces immediately after assembly. Never apply stain or sealer to the inside walls or benches.
Action Checklist0 / 5 Done
Zoning Note: Most cities allow saunas under 120 sq ft without a building permit, but setbacks from property fences (usually 3-5 ft) are still enforced.
Other Recommended Barrel Saunas
